{"product_id":"tough-pro-pla-desert-tan-1-75mm","title":"Tough Pro PLA+, Desert Tan, 1.75mm","description":"\u003cdiv\u003eTough Pro PLA+ Desert Tan 1.75mm is engineered for serious, demanding 3D-printed parts that need to survive impact and heat without sacrificing printability. Built in the United States from genuine NatureWorks 3D870 Ingeo PLA, this filament combines the best of both worlds: the ease of PLA printing with an elevated toughness that’s closer to ABS—and it does it with a clear eco-friendly edge. What sets Tough Pro PLA+ apart\n- Extraordinary toughness and heat performance: 8.8x the impact toughness of standard PLA+ and heat resistance that rivals ABS, even before any post-processing. For parts that endure drops, bumps, and warm environments, this filament delivers reliable performance.\n- Post-processing optional, but powerful: You can anneal your design after printing to further boost heat resistance and impact strength. If your part sits in a hot car or under load, annealing can unlock additional durability.\n- Eco-conscious, US-made material: Sourced from NatureWorks PLA, Tough Pro PLA+ offers a sustainably produced bioplastic with an impressive environmental profile and consistent US-based manufacturing quality.\n- Precision you can trust: Filament diameter tolerance of +\/- 0.02 mm, controlled in real time with a multi-axis laser measurement system to minimize feeding issues and ensure consistent prints.\n- Seamless printing with familiar PLA settings: Print at 220–250°C with a heated bed from 0–60°C and a range of bed surfaces (PEI, heated glass, blue painter’s tape, BuildTak, WhamBam). Typical print speeds from 60–250 mm\/s provide a smooth, reliable extrusion for complex geometries.\n- One kilo, ready to use: Delivered on an AMS-compatible spool, a full 1 kg (2.2 lbs) of Desert Tan Tough Pro PLA+ gives you plenty of material for functional prototypes, engineering parts, and end-use components.\n- Consistent quality you can depend on: All 3D-Fuel filament is produced in United States facilities with tight process controls, ensuring dependable filament quality across every spool. In practice: why designers choose Tough Pro PLA+\n- Functional prototypes that need real-world toughness: Create housings, fixtures, and mechanical components that resist impact without the brittleness sometimes seen in standard PLA+.\n- Outdoor and automotive-inspired applications: The combination of heat resistance and high impact strength makes it suitable for parts that may experience sun exposure, heat, or vibration.\n- Rapid iteration with confidence: The tight diameter tolerance and predictable printing behavior reduce failed prints and speed up design-for-test cycles. Annealing and care tips\n- Anneal after printing to maximize heat resistance and toughness, especially for parts exposed to higher temperatures or repeated stress.\n- Be aware that annealing can cause 1–2% shrinkage. If precise fit is critical, plan constraints (e.g., gypsum or salt flour) to minimize warping during the anneal process.\n- Even without annealing, Tough Pro PLA+ delivers superior heat resistance and impact performance compared with standard PLA+, making it a solid choice for desert environments and other challenging conditions. Applications and ideal use cases\n- Functional prototypes and end-use components that require durability and good surface finish.\n- Jigs, fixtures, and containment parts that must endure handling and heat exposure.\n- Mechanical housings and lightweight components where ABS-like performance is desired with PLA print-ability. Specifications at a glance\n- Filament: Tough Pro PLA+ (1.75 mm)\n- Color: Desert Tan\n- Weight on spool: 1 kg\n- Diameter tolerance: +\/- 0.02 mm\n- Printing temperature: 220–250°C\n- Bed temperature: 0–60°C\n- Bed surfaces: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam\n- Recommended print speed: 60–250 mm\/s\n- Manufacturing: United States\n- Spool: AMS-compatible, designed for easy handling Designed for makers who demand more from PLA, Tough Pro PLA+ Desert Tan gives you ABS-like toughness with PLA printability, a sustainable edge, and the reliability you need for professional-grade parts.\u003c\/div\u003e","brand":"3D-Fuel","offers":[{"title":"Tough Pro PLA+ \/ 1kg 1.75mm Spool \/ Desert Tan","offer_id":45321416769615,"sku":"A3523","price":32.95,"currency_code":"USD","in_stock":true},{"title":"Tough Pro PLA+ \/ 4kg 1.75mm Spool \/ Desert Tan","offer_id":45321416802383,"sku":"A3723","price":119.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/2406\/7407\/files\/pro-pla-desert-tan-175mm-169216.jpg?v=1779973375","url":"https:\/\/hobbytechsupply.com\/products\/tough-pro-pla-desert-tan-1-75mm","provider":"Hobby Tech Supply","version":"1.0","type":"link"}